閥體Body Material：WCB、WC6等；
閥芯Trim Material：347 SS表面硬化、316SS堆焊硬質合金、316SS堆焊司太萊合金等；
閥座Seat Material:：316SS堆焊司太萊合金等；
交貨期Delivery Schedule:
境內貨物：合同簽訂后44周（貨到項目現場時間）
For goods within the PRC customs territory：within 44 weeks after signing the contract (arrival date to the jobsite)
境外貨物: 合同簽訂后42周（提單發貨時間）
For goods outside the PRC customs territory: within 42 weeks after signing the contract (departure date on the Bill of Lading)
交貨地點Destination of delivery：
境內貨物：大榭石化項目現場
For goods within the PRC customs territory: Project site in Daxie Petrochemical
境外貨物：CIF寧波港
For goods outside the PRC customs territory: CIF Ningbo Seaport
2.對投標人的資格和業績要求：
Requirements for Qualification and reference of Bidder:
（1）資格要求:
Requirements for Qulification of Bidder:
A、投標人應為投標產品的制造商或授權代理商,代理商應提供制造商同意其在本次投標中提供該產品的正式授權書。
The bidder shall be the manufacturer of the bidding products or authorized agent,the agent shall provide the Letter of Authority from manufacturer to agree to provide the products in this Bid.
B、閥門制造商必須通過質量管理體系認證（ISO 9001或GB/T19001證書），提供證書復印件，且證書在有效期內。
The valve manufacturer must be certified by the quality management system (ISO 9001 or GB/T19001 certificate) and provide a copy of the certificate,the certificate shall be valid.
C、投標人提供的防爆電氣電子產品必須取得國家指定防爆檢驗機構頒發的防爆合格證書；對國家3C 目錄內的產品，必須取得防爆電氣類產品強制性產品認證（CCC 認證）證書。提供證書復印件，且證書在有效期內。
The explosion-proof electrical and electronic products provided by the bidder must obtain the explosion-proof qualification certificate issued by the national explosion-proof inspection institution; For the products in the national 3C catalogue, we must obtain the mandatory product certification (CCC certification) certificate of explosion-proof electrical products.Provide a copy of the certificate, and the certificate is valid.
D、特種設備證書：
Special Equipment Certificate:
境內制造廠須提供壓力管道元件制造許可（TS認證），且證書在有效期內，證書批準范圍涵蓋本次招標的壓力管道閥門范圍。
Domestic manufacture shall provide pressure piping component Manufacture License of Special Equipment released by the national authority agency of China (TS certificate), and the certificate shall be valid.The scope of certificate approval covers the scope of penstock valves in this bidding.
境外制造廠須提供壓力管道元件型式試驗報告或證書，報告或證書應覆蓋本次招標的壓力管道閥門范圍。并承諾在2024年1月31日前取得《中華人民共和國特種設備生產許可證》。
Foreign manufacture shall provide the pressure piping component Type Test Report or Certification released by the national authority agency of China,The certificate or report shall cover the scope of penstock valves in this bidding.It is necessary to promise to obtain the Special Equipment Production License of the People_EpSingleQuotes_s Republic of China before January 31, 2024.
（2）業績要求：
Requirement for Bidder_EpSingleQuotes_s reference:
2010年1月1日至投標截止日（簽約時間為業績時間），投標人所投產品應具有不少于2個合同應用于柴油加氫裝置或蠟油加氫或加氫裂化或同類高壓加氫裝置冷、熱高分工況的供貨業績，且滿足如下要求：
A、每個合同中的氣動高壓角形調節閥數量不少于5臺；
B、至少1個合同中包含1臺口徑不小于8"且壓力等級不低于Class2500氣動高壓角形調節閥；
投標人須按規定格式提交業績表，并提交相關業績證明文件。業績證明文件包括但不限于：銷售合同復印件（含相關技術附件，至少體現以下內容：合同首頁、簽署時間、貨物名稱（氣動角型調節閥）、裝置名稱（柴油加氫裝置、蠟油加氫、加氫裂化或同類高壓加氫裝置）、工況（冷、熱高分工況）、供貨數量、口徑、壓力等級）和到貨接收證明文件。
未提交業績證明文件，或所提供的業績證明文件未體現上述信息的，均視為無效業績。
From January 1, 2010 to the bidding deadline (the signing time is the performance time), the products submitted by the bidder shall have at least 2 contracts supply performance of pneumatic high-pressure angle regulating valve for diesel oil hydrogenation unit or wax oil hydrogenation or hydrocracking unit or similar high-pressure hydrogenation unit under cold and hot high pressure working condition, and meet the following requirements:
A. The number of pneumatic high pressure angle regulating valves in each contract shall not be less than 5 sets;
B. At least one contract shall include one pneumatic high pressure Angle regulating valve with diameter no less than 8" and pressure grade no less than Class2500;
The bidder shall submit the performance table in the prescribed format and submit relevant performance certification documents. Performance certification documents include but are not limited to: sales contract copy (including relevant technical attachments, at least the following: contract home page, signing time, name of goods home page (pneumatic angle regulating valve), device name (diesel oil hydrogenation unit, wax oil hydrogenation, hydrocracking, or similar high-pressure hydrogenation unit), working condition(cold and hot high pressure working condition),supply quantity, diameter, pressure level) and the arrival of the goods receiving documents.
If the performance certification documents are not submitted, or the performance certification documents provided do not reflect the above information, the performance shall be regarded as invalid.
The interested Bidders may obtain the bidding document by following method: Please login at CNOOC Procurement Operation System on the page of Invitation for Bid for purchasing Bidding document from July 27, 2022 to August 3, 2022. For the first time of login, a registration (free of charge) is needed and only after successful registration, Bidder can purchase Bidding documents online. The whole purchasing process must be operated online and offline payment will not be accepted. After successful payment of RMB 200.00 or USD 30.00 for each copy of Bidding documents which isnon-refundable, Bidder may download the Bidding documents. Bidder fails to purchase Bidding documents online is not eligible to bid.
4.投標文件遞交截止時間和 在此時間后收到的投標文件恕不接受。
The deadline and place for submission of bid: All bids must be accompanied by a bid security as specified and must be delivered to the 4th floor meeting room, CNOOC Tower, No. 6 Dongzhimenwaixiaojie, Dongcheng District,Beijing 100027, P. R. China at or before 9:30 am (Beijing Time) on August 18,2022. Any bid beyond the required time and date shall be subject for rejection.
5.開標時間：2022年8月18日上午9:30（北京時間）
Bid opening time: 9:30 am (Beijing Time) on August 18, 2022.
6.
Bid opening place:The 4th floor meeting room, CNOOC Tower, No. 6 Dongzhimenwaixiaojie, Dongcheng District,Beijing 100027, P. R. China.
7.本次招標公告同時在 站（最低評標價法.pdf